Combo Pipe Flashing

  • Suitable for both standard and retrofit applications: When retrofitting is required just cut and apply for ease of application. Clips included.
  • Larger, square base will cover a larger opening: making it more forgiving for penetration openings and allows for steeper roof pitch.
  • Unique cone design: Provides 10mm continuous contact with flashed pipe providing a watertight seal.
  • Marks in metric and imperial measurements: Makes for easier cutting to post size.
  • 20 warranty: Just fit it and forget it – we’ve got you covered.

Retrofit Installation Instructions

  • Trim the cone with tin snips to suit the post size
  • Cut seam and aluminum base with tin snips
  • With seam in downstream position, wrap cone around the pipe
  • Engage 1st clip at top of the seam using multigrips
  • Engage remaining clips working down from the top
  • Apply sealant to underside of the flexible aluminum base and to seam closure
  • Press base to the roof profile by hand
  • Smooth out any awkward creases
  • Don’t fully extend to allow for vibration
  • Fasten down by placing a fastener on either side of the seam then secure the rest of the base using self-sealing fasteners or pop (sealed) rivets

Standard Installation Instructions

  • Trim the cone with tin snips to suit the post size
  • Slide cone down the post using water as a lubricant
  • Apply sealant to underside of flexible aluminum base
  • Press base to the roof profile by hand
  • Smooth out any awkward creases
  • Don’t fully extend to allow for vibration
  • Fasten using self-sealing fasteners or pop (sealed) rivets

Product Menu ☰